Description
Clausing 2VS Vertical Knee Mill, 9″ x 49″ Table, 3 HP – NEW
SKU #0712000
Standard Features…
- Meehanite Castings for superior rigidity and wear resistance
- Hardened & Ground X,Y & Z Ways
- X/Y ways coated with Turcite B
- Column & Knee Way Covers
- T-slots are ground to provide reference edge for positioning your workpiece
- Hardened & Ground Table Surface
- Hardened & Ground Spindle
- Chromed & Ground Quill
- Chromed X, Y & Z Leadscrews
- Double Nut Leadscrew for backlash compensation
- ABEC 7/CP4 Spindle Bearings
- Coolant System w/Pump & Switch
- Flexible Segmented Coolant Nozzle
- Chromed Y Screw Covers and 0ne-piece Wipers
- 7/16″ Imperial Drawbar (2VS, 3VS )
- M16 Metric Drawbar w/lSO 40 Spindle (4VSQ)
- 3 hp AC Motor (2VS & 3VS)
- 5 hp AC Motor (4VSQ)
- AC Rapid Vertical Drive (4VSQ)
- Variable Speed Drive
- Articulating Head for Compound Angles
- Worm gear angular positioning of head in two directions
- Lever-operated manual rapid quill movement
- Handwheel for fine quill feed
- Adjustable automatic feed disengagement for quill feed
- Micrometer depth stop
- Reversing switch for clockwise or counter clockwise operation
- R-8 or lSO 30 Spindle (2VS & 3VS)
- ISO 40 Spindle (4VSQ)
- Spindle Brake (Hand operated)
- One-shot lubrication
- Tool Kit, Test and Accuracy Chart
- Operations Manual/Parts List
- Knee Assist on (4VSQ)
| Table & Ways | ||
| Table Size |
9″ x 49″ (230x1245mm)
|
|
| No. of T-Slots |
3
|
|
| T-Slot Width |
5/8″ (16mm)
|
|
| T-Slot Center Distance |
2.48″ (63mm)
|
|
| Table Ways |
Dovetail
|
|
| Knee Ways |
Dovetail
|
|
| Column Ways |
Dovetail
|
|
| Travels | ||
| X Longitudinal |
33.86″ (860mm)
|
|
| Y Cross |
11.8″ (300mm)
|
|
| Knee |
15.7″ (400mm)
|
|
| Ram |
18.53″ (470mm)
|
|
| Motors & Spindle | ||
| Spindle Motor |
3 hp
|
|
| Amp. Draw 208v. |
10
|
|
| Amp. Draw 230v. |
10
|
|
| Amp. Draw 460v. |
5
|
|
| Variable Spindle Speed rpm |
60-4300
|
|
| Low Range rpm |
60-500
|
|
| High Range rpm |
550-4300
|
|
| Main Spindle Taper |
R-8 or ISO 30
|
|
| Spindle Travel |
5″ (127mm)
|
|
| Quill Feed – in/rev. (mm/rev) |
.0015/.0031/.006 (.004/.008/.015mm)
|
|
| Quill Diameter |
3.38″ (85mm)
|
|
| Construction & Weight | ||
| Column Turret Diameter |
14.96″ (380mm)
|
|
| Knee Width |
11.81″ (300mm)
|
|
| Column Bearing Length |
16.83″ (427mm)
|
|
| Saddle/Table Bearing Length |
19.88″ (505mm)
|
|
| Ram/Turret Bearing Length |
17.51″ (445mm)
|
|
| Ram Length |
32.75″ (832mm)
|
|
| Table Load |
700 Ibs. (316kg)
|
|
| Net Weight |
2,200 Ibs. (998kg)
|
| Dimensions | |
| Model |
2VS
|
| A Height |
86″ (2185mm)
|
| B Depth |
75″ (1905mm)
|
| C Width |
69″ (1752mm)
|
| D Table to Spindle |
3.54″-19.29″ (90-490mm)
|
| E 45° Inward |
0-13″ (0-330mm)
|
| F Spindle ø to column |
5.5″-26″ (140-660mm)
|
| G 45° Outward |
10.43″-27.95″ (265-710mm)
|
| H Head Tilt |
90° right & left
|