Description
Akyapak 2″ x 2″ x 1/4″ Angle Bending Roll, Model APK 61 – NEW
Asset # 15475
Serial #611097
Equipped with:
- APK 61 Angle Bending Roll
- Machine body is steel (ST-52) construction
- On APK61 rolls are driven by a hydraulic motor+planetry gearbox and gears
- Shafts made of special steel, hardened and grounded
- APK61 guide rolls are adjustable manually in one direction
- One set standard rolls
- Manual lubrication
- Lower rolls hydraulic moveable up and down
- Digital display for lower rolls
- Separate and moveable control panel
- Horizontal & vertical working
- Suitable for CE
- Digital Readout
- Guide Rolls for Angle Material
| TECHNICAL DETAILS
Roll Diameter Ø inch 6.97” Shaft Ø inch 2.36” Rolling Speed ft/min 21’ per/min. Motor Power hp 5.4 Length Ft 4.6’ Height Ft 4.76’ Width Ft 3.12’ Weight Ibs 2,140 |
| Bend Type | Size
inch |
Diameter
min Ø |
Dies |
| Angle Leg Out | L1-1/8” x 1/8” L2” x 2” x ¼” |
10
40 |
AD |
| Angle Leg In | L1-1/8” x 1/8”
L2” x 2” x 3/16” |
16
40 |
AD |
| T Section Let Out | 2”x2”x1/4” | 24” | A |
| T Section Leg In | 2”x2”x1/4 | 28” | A |
| Flat, Hard Way | 1-3/4” x 3/8”
2-3/8”x 13/16” 3-1/8”x1” |
9”
20” 83” |
A |
| Flat, Easy Way | 2” x 3/16”
3”x3/4” |
8”
48” |
A |
| Square | 5/8”
1-3/8” |
14” 55” |
A |
| Round | 3/4”
1-1/2” |
14” 32” |
B |
| Tube | 1×0.060
2-3/4”x0.078” |
8” 63” |
B |
| Pipe | 3/4” sch. 40
2”sch.40 |
8”
40” |
B |
| Rectangle Tube | 3-1-1/8”x0.0125” |
266”
|
B |
| Square Tube |
2” x 0.125”
|
157” |
B |
| Channel Easy Way
Legs Out |
3” x 2”x1/4” | 32” | D
|
| Channel Easy Way
Legs In |
3”x2”x1/4” | 32” | D |
